Sharp PG-M10SU 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Sharp PG-M10SU에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp PG-M10SU 31 페이지. Sharp digital multimedia projector pg-m10x, pg-m10s operation manual
Sharp PG-M10SU에 대해서도 마찬가지입니다: 운영 매뉴얼 (49 페이지)

페이지 인쇄

Tools required

1. A soft sheet on which the projector is placed upside down. It is to protect the unit against scratches.

2. Phillips screwdriver No. 1

Precautions in replacing and handling the lamp

1. Be sure to unplug the power cable before starting the procedure. (For prevention of electric shock)

2. Make sure that the lamp has cooled down before replacement. (For prevention of burns)

3. Do not give intense shock or vibration to the lamp. (For prevention of breakage and injury)

4. Do not disassemble the lamp.

Replacement procedure

1) Remove the screw off the lamp cover.

2) Detach the lamp cover.

3) Remove the three screws off the lamp unit.

4) Take out the lamp unit by holding its grip.

REPLACING THE LAMP

5) Install a new lamp unit into position.

6) Tighten up the three screws in the lamp unit.

7) Mount the lamp cover and fix it with the screw.

8) Reset the total lamp timer.

Select the lamp time menu, and keep pressing the

POWER ON button of the remote controller for 10

seconds or longer.

PG-M10SU/SE

PG-M10XU/XE