Sharp PG-M10SU Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Проектор Sharp PG-M10SU. Sharp PG-M10SU 31 сторінка. Sharp digital multimedia projector pg-m10x, pg-m10s operation manual
Також для Sharp PG-M10SU: Посібник з експлуатації (49 сторінок)

Друкувати сторінку

Tools required

1. A soft sheet on which the projector is placed upside down. It is to protect the unit against scratches.

2. Phillips screwdriver No. 1

Precautions in replacing and handling the lamp

1. Be sure to unplug the power cable before starting the procedure. (For prevention of electric shock)

2. Make sure that the lamp has cooled down before replacement. (For prevention of burns)

3. Do not give intense shock or vibration to the lamp. (For prevention of breakage and injury)

4. Do not disassemble the lamp.

Replacement procedure

1) Remove the screw off the lamp cover.

2) Detach the lamp cover.

3) Remove the three screws off the lamp unit.

4) Take out the lamp unit by holding its grip.

REPLACING THE LAMP

5) Install a new lamp unit into position.

6) Tighten up the three screws in the lamp unit.

7) Mount the lamp cover and fix it with the screw.

8) Reset the total lamp timer.

Select the lamp time menu, and keep pressing the

POWER ON button of the remote controller for 10

seconds or longer.

PG-M10SU/SE

PG-M10XU/XE