CP4/CP4N
4-Series Control System
Connect the Control Subnet
(CP4N Only)
The CP4N has a dedicated Control Subnet that is used for
communication between the control system and Crestron Ethernet
devices without interference from other traffic on the network.
CAUTION: Do not connect the CONTROL SUBNET port to the LAN.
The CONTROL SUBNET port must only be connected to Crestron
Ethernet devices.
For more information on using the Control Subnet, refer to the 3-Series®
Control System Reference Guide (Doc. 7150) at
www.crestron.com/manuals.
Configure the Device
The control system may be configured using the provided web
configuration interface. The interface can be accessed using the control
system IP address or the Crestron XiO Cloud™ service.
Configuration via IP Address
To access the web configuration interface using the control system
IP address:
NOTE: The control system ships with DHCP enabled. A DHCP server is
required to access the web configuration interface via the device
IP address.
1. Connect the control system to the network.
2. Use the Device Discovery tool in Crestron Toolbox™ software to
discover the control system and its IP address on the network.
3. Enter the control system IP address into a web browser.
Configuration via Crestron XiO Cloud
The Crestron XiO Cloud service allows supported Crestron devices across
an enterprise to be managed and configured from one central and secure
location in the cloud. Supported devices are configured to connect to the
service. Use of the service requires a registered Crestron XiO Cloud
account.
NOTE:
The device may be disconnected from the service by navigating
to the Cloud Services tab in Crestron Toolbox software (Functions >
Device Info > Cloud Services). For details, refer to the Crestron
Toolbox help file.
To access the web configuration interface using the Crestron XiO Cloud
service:
1. Connect the control system to the network.
2. Record the MAC address and serial number that are labeled on the top
of the control system. The MAC address and serial number are
required to add the device to the service.
3. Do either of the following
For existing accounts, access the Crestron XiO Cloud service at
l
https://portal.crestron.io.
For new accounts, register for a Crestron XiO Cloud account at
l
www.crestron.com/xio-cloud-registration.
4. Claim the device to the service as described in the Crestron XiO Cloud
User Guide (Doc. 8214) at www.crestron.com/manuals.
5. Select the device from the cloud interface to view its settings.
Quick Start
3
페이지 인쇄