Shimano Alfine S7000 Series 딜러 매뉴얼 - 페이지 44
{카테고리_이름} Shimano Alfine S7000 Series에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano Alfine S7000 Series 47 페이지.
페이지 인쇄
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
MAINTENANCE
In the case of 11-speed internal geared hub (Oil maintenance kit: Y13098023)
7
8
(A)
9
(B)
10
Pull the piston out slowly to draw out
the oil inside the hub shell.
(A)
Rotate the wheel slowly until the oil port
is facing up.
While being careful that the tube does
not come off the syringe, remove the
bleed nipple.
Remove the old oil from the syringe.
44
(A)
Piston
NOTE
If the piston is pulled out quickly, air is likely
to be mixed in.
NOTE
To make sure that the syringe does not get
caught by the chain case, etc., store the
syringe between the spokes when turning the
wheel.
(A)
Bleed nipple
(B)
10mm spanner