Shimano BR-M8000 딜러 매뉴얼 - 페이지 34

{카테고리_이름} Shimano BR-M8000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BR-M8000 39 페이지. Hydraulic disc brake

페이지 인쇄

MAINTENANCE

Replacing the brake hose

(A)

(B) (C)

(y)

(z)

(A) (C)

To be continued on next page

(D)

(E)

(C)

(A)

(z)

(B)

(D)

(E)

Pass the brake hose through the

connecting bolt and olive, as shown in

the illustration.

(y)

Direction of insertion

(z)

Grease the outside of the olive.

Use a tapered tool to smooth out the

inside of the cut end of the brake hose,

and mount the connector insert.

Connect the brake hose to TL-BH61 and

secure TL-BH61 in a vise, as shown in the

illustration.

Then, hammer down the connector

insert until the connector insert mount

comes into contact with the end of the

brake hose.

(z)

SM-BH59-JK-SS/SM-BH90-SS: 1mm

(A)

Brake hose

(B)

Connecting bolt

(C)

Olive

(D)

Cut end

(E)

Grease

NOTE

For installation to the built-in type frame, first

connect to the frame caliper the end of the

brake hose to which the banjo is not

attached.

(A)

Brake hose

(B)

Olive

(C)

Connector insert

(D)

TL-BH61

(E)

Vise

NOTE

If the end of the brake hose is not in contact

with the connector insert mount, the brake

hose may be disconnected or cause fluid leaks.