Shimano BR-M8000 딜러 매뉴얼 - 페이지 37

{카테고리_이름} Shimano BR-M8000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BR-M8000 39 페이지. Hydraulic disc brake

MAINTENANCE

Replacing the brake pads

BR-M8000

(A)

(C)

BR-M6000

Depress the brake lever several times to check that the operation becomes stiff.

Remove the pad spacer, install the wheel, and then check that there is no interference

between the disc brake rotor and caliper.

If they are touching, adjust while referring to "Installation of the calipers and securing the

hose".

Install the new brake pads, the bolt, the

split pin, and the pad spacer (red).

For BR-M8000, at this point, make sure

to install the snap ring as well.

For BR-M6000, after this, bend open the

split pin.

(B)

(D)

(A)

(E)

(D)

(A)

Brake pad

(B)

Snap ring

(C)

Bolt

(D)

Pad spacer (red)

(E)

Split pin

Tightening torque

2 - 4 N·m

TECH TIPS

Install the pad fixing spring as shown in the

illustration. (There are left (L) and right (R)

marks on the spring.)

Pad fixing spring