Shimano NEXUS CS-C7000 딜러 매뉴얼 - 페이지 15
{카테고리_이름} Shimano NEXUS CS-C7000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano NEXUS CS-C7000 48 페이지.
페이지 인쇄
TO ENSURE SAFETY
< SG-S7001-11 >
When you perform oil maintenance, use the SG-S700 OIL or TL-S703 maintenance kit.
When you replace the oil, follow the manual for TL-S703. When you replace the seal on the right side, use TL-
S704. If SG-S700 OIL is not used, problems such as an oil leakage and shifting unit malfunction may occur.
< CT-S500 / CT-S510 >
Clean the chain tensioner periodically and lubricate all moving parts and pulleys.
If there is a large amount of excess play in the pulleys and an abnormal amount of noise is generated while
riding, replace the pulleys.
Do not disassemble the pulley unit.
If the tension applied is too strong, noise may be generated while riding.
If the chain becomes elongated and excessive looseness occurs, readjust the chain tension.
< CT-S510 >
Supported hubs
8-speed hub
This product is for single front chainrings only.
Coaster brake type
If the wheel becomes stiff and difficult to turn, replace the brake shoes or lubricate with grease.
Use only the specified grease for the brake shoes and when using a lubrication kit, remove the brake shoes to
avoid contact with the oil.
The actual product may differ from the illustration because this manual is
intended mainly to explain the procedures for using the product.
Applicable sprockets
16 - 23T
15
Supported rear dropout
thickness
4 - 9 mm
Supported rear dropout shape
Vertical