Shimano NEXUS CS-C7000 Посібник дилера - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник дилера для Велосипед Shimano NEXUS CS-C7000. Shimano NEXUS CS-C7000 48 сторінок.

TO ENSURE SAFETY

< SG-S7001-11 >

When you perform oil maintenance, use the SG-S700 OIL or TL-S703 maintenance kit.

When you replace the oil, follow the manual for TL-S703. When you replace the seal on the right side, use TL-

S704. If SG-S700 OIL is not used, problems such as an oil leakage and shifting unit malfunction may occur.

< CT-S500 / CT-S510 >

Clean the chain tensioner periodically and lubricate all moving parts and pulleys.

If there is a large amount of excess play in the pulleys and an abnormal amount of noise is generated while

riding, replace the pulleys.

Do not disassemble the pulley unit.

If the tension applied is too strong, noise may be generated while riding.

If the chain becomes elongated and excessive looseness occurs, readjust the chain tension.

< CT-S510 >

Supported hubs

8-speed hub

This product is for single front chainrings only.

Coaster brake type

If the wheel becomes stiff and difficult to turn, replace the brake shoes or lubricate with grease.

Use only the specified grease for the brake shoes and when using a lubrication kit, remove the brake shoes to

avoid contact with the oil.

The actual product may differ from the illustration because this manual is

intended mainly to explain the procedures for using the product.

Applicable sprockets

16 - 23T

Supported rear dropout

thickness

4 - 9 mm

Supported rear dropout shape

Vertical