Shimano PD-EF202 딜러 매뉴얼 - 페이지 8
{카테고리_이름} Shimano PD-EF202에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano PD-EF202 17 페이지.
Maintenance
Replacing the pins
Maintenance
Replacing the pins
PD-GR400
If the pins become worn or damaged, replace them with new pins.
1.
Replace pins as shown in the figure.
Adjusting axle bearings
Adjustment is required if the rotating parts are not functioning properly. Follow the procedures
shown below.
PD-EF202/PD-EF205
1.
Remove the cap using a tool such as a slotted screwdriver.
2.
Use the TL-PD400 SHIMANO original tool to turn the cone to adjust the
bearing preload.
1 - 1.5 N·m
Pin
Cap
8