Shimano E6000 Series 사용자 설명서 - 페이지 23

{카테고리_이름} Shimano E6000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano E6000 Series 47 페이지. Total electric power system
Shimano E6000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지)

페이지 인쇄

1. Press assist-Z to switch the mode to "OFF".

2. Press assist-Z once again 2 seconds until "WALK" is

displayed.

3. Press and hold assist-Z to start walk assist.

When "WALK" is displayed, press and hold down

Assist-Z on the assist switch to start the walk assist

function. Releasing Assist-Z stops the walk assist

function, or pressing Assist-Y can stop the walk assist

function.

• If Assist-Z is not operated for over 1 minute, the mode will change to OFF.

• If the bicycle does not move after the walk assist function turns on, the function automatically stops. To restart the walk assist function,

release the assist switch and press and hold down Assist-Z again.

• The walk assist function can operate at a maximum of 6 km/h.

• The assistance level and speed vary with the gear position.

Assist

2 seconds

Assist

Press

and

hold

down

Shift

< SC-E6000 >

< SC-E6010 >

Shift