Shimano E6000 Series Kullanıcı Kılavuzu - Sayfa 23

Scooter Shimano E6000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Shimano E6000 Series 47 sayfaları. Total electric power system
Ayrıca Shimano E6000 Series için: Kullanıcı Kılavuzu (38 sayfalar)

Sayfayı Yazdır

1. Press assist-Z to switch the mode to "OFF".

2. Press assist-Z once again 2 seconds until "WALK" is

displayed.

3. Press and hold assist-Z to start walk assist.

When "WALK" is displayed, press and hold down

Assist-Z on the assist switch to start the walk assist

function. Releasing Assist-Z stops the walk assist

function, or pressing Assist-Y can stop the walk assist

function.

• If Assist-Z is not operated for over 1 minute, the mode will change to OFF.

• If the bicycle does not move after the walk assist function turns on, the function automatically stops. To restart the walk assist function,

release the assist switch and press and hold down Assist-Z again.

• The walk assist function can operate at a maximum of 6 km/h.

• The assistance level and speed vary with the gear position.

Assist

2 seconds

Assist

Press

and

hold

down

Shift

< SC-E6000 >

< SC-E6010 >

Shift