Accutone USB400 VoIP COMMUNICATION HEADSET 설치 매뉴얼 및 사용자 설명서 - 페이지 11

{카테고리_이름} Accutone USB400 VoIP COMMUNICATION HEADSET에 대한 설치 매뉴얼 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accutone USB400 VoIP COMMUNICATION HEADSET 12 페이지. Voip communication headset
Accutone USB400 VoIP COMMUNICATION HEADSET에 대해서도 마찬가지입니다: 설치 매뉴얼 및 사용자 설명서 (8 페이지)

페이지 인쇄

Troubleshooting.

D3. frequently asked questions

No sound coming from the headset

the USB plug is not properly plugged into the jack : check if the LED is on or replug the

headset and restart installation

the headset was connected during music software being played : close all software and

restart installation

the audio device selected in your operating system is not correct : go to control panel,

select Sounds and Multimedia Properties or Sounds and Audio Device

Propeties (XP), open Sound Playback tab and select USB Audio Device or

Accutone Audio Adaptor in the Preferred Device scroll-down selection.

the volume control for your operating system or music software is set to mute : uncheck

mute from your system or music software.

the computer does not recognize the USB headset: restart your system or re-install the

USB headset driver by unplugging and re-plugging the USB plug.

Cannot record sound from the microphone

the USB plug is not firmly plugged it : check the connection of the headset with the

computer.

the mic muting function is on : go to Sound and Multimedia (Audio Device)

Properties and select Volume control for Sound Recording to check Selected in

the Microphone column.

the audio device selected in your operating system is not correct : refer to the above

section on the same problem but open the Sound Recording tab instead.

Multi-directional control button not functioning

the USB plug is not firmly plugged it : check the connection of the headset with the

computer.

the LED-indicator shows a steady white, and no matter what which angle I press the

control button, the LED-indicator doesn't change colors. : the proper audio device

driver is not being used, go to Sound and Audio Device Properties and select the

Sound Playback and Sound Recording tabs to see if the proper USB driver (C-

Media or Accutone USB Audio Device) is selected, if not choose from the drop down

menu to find it.

verifying successful installation of drivers

configuring your audio devices

frequently asked question

USB400 - Installation Guide & User Manual

D3. frequently asked questions

Cannot activate AccuSound

I have completely installed all drivers and software from the installation CD, but when I

press speaker mute, the AccuSound program doesn't initiate : check the notification

area in the icon tray at the bottom right of your desktop to see if the AccuSound

icon is there.

If you cannot find the icon, go to Start > All Programs > Accutone > Accusound

> and double click on the AccuSound icon to start up the program. It may seem like

nothing is happening after you start AccuSound

background. Test to see if the program is functioning by clicking mute in your AU400

USB controller.

If you can see the AccuSound icon, but it still doesn't activate when you press the

click mute in your controller, it is possible that Windows is not using the proper USB-

Audio driver, or possibly the driver for your sound card. If you have a keyboard which

supports sound control or volume adjustments, try pushing the mute button on your

keyboard, or simply go to Control Panel and select Sound and Audio Device

Properties, under Sound Playback and Sound Recording tabs to see if the

proper driver has been selected.

Accutone USB400 VoIP COMMUNICATION HEADSET 설치 매뉴얼 및 사용자 설명서 - 페이지 11

No sound coming from the headset

Cannot record sound from the microphone

Other problems