Accutone USB400 VoIP COMMUNICATION HEADSET Install Manual & User Manual - Page 11

Browse online or download pdf Install Manual & User Manual for Headsets Accutone USB400 VoIP COMMUNICATION HEADSET. Accutone USB400 VoIP COMMUNICATION HEADSET 12 pages. Voip communication headset
Also for Accutone USB400 VoIP COMMUNICATION HEADSET: Installation Manual & User Manual (8 pages)

Print Page
Troubleshooting.
Troubleshooting.
D3. frequently asked questions

No sound coming from the headset

the USB plug is not properly plugged into the jack : check if the LED is on or replug the
>
headset and restart installation
the headset was connected during music software being played : close all software and
>
restart installation
the audio device selected in your operating system is not correct : go to control panel,
>
select Sounds and Multimedia Properties or Sounds and Audio Device
Propeties (XP), open Sound Playback tab and select USB Audio Device or
Accutone Audio Adaptor in the Preferred Device scroll-down selection.
the volume control for your operating system or music software is set to mute : uncheck
>
mute from your system or music software.
the computer does not recognize the USB headset: restart your system or re-install the
>
USB headset driver by unplugging and re-plugging the USB plug.

Cannot record sound from the microphone

the USB plug is not firmly plugged it : check the connection of the headset with the
>
computer.
the mic muting function is on : go to Sound and Multimedia (Audio Device)
>
Properties and select Volume control for Sound Recording to check Selected in
the Microphone column.
the audio device selected in your operating system is not correct : refer to the above
>
section on the same problem but open the Sound Recording tab instead.
Multi-directional control button not functioning
the USB plug is not firmly plugged it : check the connection of the headset with the
>
computer.
the LED-indicator shows a steady white, and no matter what which angle I press the
>
control button, the LED-indicator doesn't change colors. : the proper audio device
driver is not being used, go to Sound and Audio Device Properties and select the
Sound Playback and Sound Recording tabs to see if the proper USB driver (C-
Media or Accutone USB Audio Device) is selected, if not choose from the drop down
menu to find it.
19
verifying successful installation of drivers
configuring your audio devices
frequently asked question
USB400 - Installation Guide & User Manual
D3. frequently asked questions
TM
Cannot activate AccuSound
I have completely installed all drivers and software from the installation CD, but when I
>
press speaker mute, the AccuSound program doesn't initiate : check the notification
area in the icon tray at the bottom right of your desktop to see if the AccuSound
icon is there.
If you cannot find the icon, go to Start > All Programs > Accutone > Accusound
> and double click on the AccuSound icon to start up the program. It may seem like
nothing is happening after you start AccuSound
background. Test to see if the program is functioning by clicking mute in your AU400
USB controller.
TM
If you can see the AccuSound icon, but it still doesn't activate when you press the
click mute in your controller, it is possible that Windows is not using the proper USB-
Audio driver, or possibly the driver for your sound card. If you have a keyboard which
supports sound control or volume adjustments, try pushing the mute button on your
keyboard, or simply go to Control Panel and select Sound and Audio Device
Properties, under Sound Playback and Sound Recording tabs to see if the
proper driver has been selected.

Other problems

I'm using Windows 98 or 98SE, and the unit just doesn't work properly no matter how
>
many times I re-install the drivers: PCs running Windows 98SE with AMD processor at
350MHz or faster, and pc that uses VIA Technologies USB Controller will require a
Microsoft USB Update Patch file, go to www.accutone.com.hk website, under "more
information" in the AU400 adaptor section, click "Microsoft Windows 98 Driver
Update" and follow the instructions.
can hear sound but unable to listen to CD music-playback: make sure CD-ROM
>
supports the digital play function, check with your CD-ROM manufacturer.
* For problems not listed in the above section, or more detailed instructions to various troubleshooting, please refer back
to FAQ:troubleshooting section in our website at http://www.accutone.com.hk
USB400 - Installation Guide & User Manual
[ inspiring people, inspiring change ]
Troubleshooting.
TM
TM
TM
because the program runs in the
TM
20