Accutone A20 OMEGA 사용자 설명서 및 설치 설명서 - 페이지 5

{카테고리_이름} Accutone A20 OMEGA에 대한 사용자 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accutone A20 OMEGA 12 페이지. Telephone & multimedia amplifier

connection & preparations.

Hooking all the parts together!

A.2.4 Inserting Batteries

Slightly depress the Battery Compartment Door (4) and slide it

outwards. Install batteries with polarities according to the battery diagram

inside the compartment. Two UM-3 (AA) batteries are required. Alkaline

batteries are recommended.

A.2.5 External DC Supply

The unit provides the choice of using an external DC supply instead of

batteries. You can connect an AC Adaptor to the External DC Supply Jack (I).

When purchasing an AC adaptor, make sure the output voltage is 9V DC,

and current is 500mA, but we recommend you contact your local dealer for

information.

*AC Adaptor not included!

A.2

2 x AA Batteries

part a. getting comfortable.

connection & preparations.

A.2

A.2.6 Headset Hanger Components

Along with your A20 Omega amplifier, you should be able to find the

following 3 pieces of components for the headset hanger. There are one

plastic and two metal components.

A.2.7 Hanger Installation Part 1

Insert the metal piece (I) first into the bottom of the A20 Omega amplifier as

illustrated, make sure that it fits perfectly into the track, you should be able

to feel a click, which means the metal is fastened to the plastic bottom. Then,

gently turn the metal piece inwards towards the amplifier so that the entire

piece is fastened to the bottom, as shown below.

part a. getting comfortable.

Hooking all the parts together!

III