Accutone A20 OMEGA Посібник користувача та інструкція з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Підсилювач Accutone A20 OMEGA. Accutone A20 OMEGA 12 сторінок. Telephone & multimedia amplifier

Друкувати сторінку

connection & preparations.

Hooking all the parts together!

A.2.4 Inserting Batteries

Slightly depress the Battery Compartment Door (4) and slide it

outwards. Install batteries with polarities according to the battery diagram

inside the compartment. Two UM-3 (AA) batteries are required. Alkaline

batteries are recommended.

A.2.5 External DC Supply

The unit provides the choice of using an external DC supply instead of

batteries. You can connect an AC Adaptor to the External DC Supply Jack (I).

When purchasing an AC adaptor, make sure the output voltage is 9V DC,

and current is 500mA, but we recommend you contact your local dealer for

information.

*AC Adaptor not included!

A.2

2 x AA Batteries

part a. getting comfortable.

connection & preparations.

A.2

A.2.6 Headset Hanger Components

Along with your A20 Omega amplifier, you should be able to find the

following 3 pieces of components for the headset hanger. There are one

plastic and two metal components.

A.2.7 Hanger Installation Part 1

Insert the metal piece (I) first into the bottom of the A20 Omega amplifier as

illustrated, make sure that it fits perfectly into the track, you should be able

to feel a click, which means the metal is fastened to the plastic bottom. Then,

gently turn the metal piece inwards towards the amplifier so that the entire

piece is fastened to the bottom, as shown below.

part a. getting comfortable.

Hooking all the parts together!

III