Actron AutoScanner OBD II Scan Tool CP9575 사용자 설명서 - 페이지 7
{카테고리_이름} Actron AutoScanner OBD II Scan Tool CP9575에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Actron AutoScanner OBD II Scan Tool CP9575 16 페이지. Autoscanner obd ii scan tool
페이지 인쇄
a faulty component or system. Pending DTCs convert to Diagnostic
Trouble Codes when an emissions problem persists long enough to
be considered a real problem, not an anomaly. Pending DTCs are
indicated by a icon.
Vehicle Selection
Vehicle Selection will be displayed for Read Codes when a manufacturer
specific DTC is retrieved from the vehicle.
Erase Codes
The Erase function performs the following:
9 Erases Codes (both Diagnostic Trouble Codes and Pending
DTCs)
9 May erase Freeze Data results depending on the vehcle.
9 Sets I/M Monitors to not ready.
Perform Erase Codes function only after systems have
NOTICE
been checked completely and DTCs have been written
down.
To erase codes from the vehicle computer:
1. Set the ignition to Key On and Engine Off. Do NOT start the
vehicle. The engine should not be running.
2. Press and hold the ERASE key for 3 seconds then release, or
Select Erase Codes from Main Menu and press
3. When the confirmation message appears on the display, choose
one of the following options.
• To proceed with the operation: Press
• To cancel the operation and return to the Main Menu: Press
BACK for NO.
The Tool will automatically perform the Read Codes function after
erasing codes. The Tool will then indicate the number of codes
remaining.
NOTICE
If after erasing codes a DTC returns, the problem has
not been fixed or other faults are present.
7
ENTER.
ENTER for YES.