Actron AutoScanner OBD II Scan Tool CP9575 사용자 설명서 - 페이지 11
{카테고리_이름} Actron AutoScanner OBD II Scan Tool CP9575에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Actron AutoScanner OBD II Scan Tool CP9575 16 페이지. Autoscanner obd ii scan tool
페이지 인쇄
View Data allows the following items to be viewed on the Tool:
Sensor data
Operation of switches
Operation of solenoids
Operation of relays
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]. The Tool identifies them
by their identification names (ID) assigned by manufacturer (i.e. $10
or $1A). See PID Definitions for more information.
Updating Your Tool
1.
Download Scanning Suite from http://www.Actron.com/downloads/.
2.
Install Scanning Suite.
3.
Connect USB Cable to Tool and PC.
4.
Start Scanning Suite. Click on Tool Update Icon and follow in-
structions.
Troubleshooting
If a "LINK ERROR" message appears, cycle the ignition key
to the OFF position for 10 seconds, then back ON, then press
the
ENTER key. Make sure the ignition key is in the ON
n o t the ACCESSORY position.
If the MIL Status is ON and the MIL is not illuminated with the
engine running, then a problem exists in the MIL circuit.
11