Digital Check SB 600 사용자 설명서 - 페이지 9

{카테고리_이름} Digital Check SB 600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Check SB 600 16 페이지. Sb series
Digital Check SB 600에 대해서도 마찬가지입니다: 쉬운 설치 매뉴얼 (1 페이지)

페이지 인쇄

1. Install Scanner Driver Software

Initial Scanner Image Calibration

Note: Before using your scanner for the first time (and/or using

it on a new PC) you must calibrate the unit.

Performing Initial Scanner Calibration

There are two different ways to calibrate your scanner:

1) Calibrate from Scanners and Cameras under Control Panel

a. Go to: Windows "START" / Control Panel / (Printer and Other

Hardware) Scanners and Cameras and you will see your model listed

here.

b. Right click on your scanner model and a pull down window will appear.

c. Select "Calibrate" option to start this process.

d. Vista users need to right click on the scanner model and go to

"Properties".

e. Insert the calibration target and select "Calibrate" button.

2) From your bundled software application (or your own TWAIN compliant

application)

a. Under the menu toolbar select: File / Select Source (Scanning Source).

b. Choose your scanner model "SB500, 600, 1000".

c. Do not select the "SB500, 600, 1000" at this time.

d. Under the menu toolbar select: File / Acquire Image Data...

e. The TWAIN user interface appears (see image below).

f. Insert the calibration target that came with your scanner then select

"Calibrate".

NOTE: Should you lose or forget the calibration target when traveling, you can simply use any plain

"white" piece of printer paper to perform the calibration. Accept the message to proceed to scanning. (See

below)

v061311