Digital Check TellerScan 215 쉬운 설치 매뉴얼
{카테고리_이름} Digital Check TellerScan 215에 대한 쉬운 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Check TellerScan 215 2 페이지. Countertop check scanners
Digital Check TellerScan 215에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)
Congratulations on purchasing the most reliable check scanner in the industry, which features Best Read™ image quality, Best Read™ MICR, and Infinity™ check feed.
Step #1: Check Scanner Components
TellerScan scanner.
Power supply & electrical supply cord.
Inkjet cartridge.
(for models with endorsement option)
USB 2.0 cable.
Grasp the protective plastic bag as a handle
to remove the scanner from the box.
Then remove the scanner from the bag.
Step #2: Install the Inkjet Cartridge
(for models with endorsement option)
Remove the center cover by lifting
vertically.
Scanner
Inkjet Cartridge
Power Supply
Open the inkjet cartridge pouch and
remove the tape seal on the cartridge.
Electrical Supply Cord
Carefully insert the cartridge at a slight
USB Cable
downward angle and snap into place.
Replace the center cover.
Step #3: Connect the Scanner
Position the scanner for easy access to the
entry and exit trays. The scanner also needs
to be at least 6" away from any power
supply to avoid interference with the
scanner's magnetic read head.
Connect the power supply cord to the
back of the scanner.
Connect the electrical supply cord to the
power supply, then plug the electrical
supply cord into an electrical outlet.
Center Cover
NOTE:
Device drivers have been installed before
connecting the USB cable to the PC.
If you have not installed the drivers, check
with your bank representative.
Connect the USB cable, first to the
scanner (below) and then to the PC.
Confirm that the TellerScan USB
Back of Scanner
On / Off
USB Port
Power
Switch