Digital Check TellerScan 215 Easy Installation Manual

Browse online or download pdf Easy Installation Manual for Scanner Digital Check TellerScan 215. Digital Check TellerScan 215 2 pages. Countertop check scanners
Also for Digital Check TellerScan 215: User Manual (19 pages)

Print Page

Congratulations on purchasing the most reliable check scanner in the industry, which features Best Read™ image quality, Best Read™ MICR, and Infinity™ check feed.

Step #1: Check Scanner Components

TellerScan scanner.

Power supply & electrical supply cord.

Inkjet cartridge.

(for models with endorsement option)

USB 2.0 cable.

Grasp the protective plastic bag as a handle

to remove the scanner from the box.

Then remove the scanner from the bag.

Step #2: Install the Inkjet Cartridge

(for models with endorsement option)

Remove the center cover by lifting

vertically.

Scanner

Inkjet Cartridge

Power Supply

Open the inkjet cartridge pouch and

remove the tape seal on the cartridge.

Electrical Supply Cord

Carefully insert the cartridge at a slight

USB Cable

downward angle and snap into place.

Replace the center cover.

Step #3: Connect the Scanner

Position the scanner for easy access to the

entry and exit trays. The scanner also needs

to be at least 6" away from any power

supply to avoid interference with the

scanner's magnetic read head.

Connect the power supply cord to the

back of the scanner.

Connect the electrical supply cord to the

power supply, then plug the electrical

supply cord into an electrical outlet.

Center Cover

NOTE:

Device drivers have been installed before

connecting the USB cable to the PC.

If you have not installed the drivers, check

with your bank representative.

Connect the USB cable, first to the

scanner (below) and then to the PC.

Confirm that the TellerScan USB

Back of Scanner

On / Off

USB Port

Power

Switch