Digital Check TellerScan 4120 사용자 설명서 - 페이지 6

{카테고리_이름} Digital Check TellerScan 4120에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Check TellerScan 4120 20 페이지. Branch office check scanner

TellerScan 4120 User Manual Rev 050609

Installing the Rear Endorser Inkjet Cartridge

Follow these instructions when installing the inkjet cartridge for the first time, or when

replacing an empty cartridge:

1. Remove the center cover and locate the

inkjet printer. (Fig. 5)

2. If replacing an existing cartridge, remove the

inkjet cartridge by grasping the small tab at

the rear end and gently pulling upward.

Discard the used cartridge.

3. Obtain a new inkjet cartridge (HP part

number C6602A). For new installations, one

new cartridge is included with each inkjet

model scanner.

instructions included with the cartridge

4. Remove the protective tape covering the ink nozzles. Be careful not to touch the ink

nozzle with your fingers or allow it to come in contact with any clothing.

5. Insert the nozzle end of the cartridge into the cradle (Fig. 5) in the scanner and slide

forward while keeping the reservoir end of the cartridge tilted slightly upward.

6. Push the cartridge downward until it snaps into position and then replace the top-

center scanner cover.

Note: If the scanner has to be transported by common carrier from one place to another

or extended periods of inactivity, it's advisable to remove the inkjet cartridge from the

scanner and seal in an airtight bag. If the cartridge has not been used for an extended

period of time, it may be necessary to clean the inkjet nozzles with a wet towel, and

then blot dry.

Be certain to read the

Fig. 5