Digital Data Communications Level One GTL-2091 매뉴얼 - 페이지 6

{카테고리_이름} Digital Data Communications Level One GTL-2091에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Data Communications Level One GTL-2091 18 페이지. Stp optional characteristic configuration commands
Digital Data Communications Level One GTL-2091에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지), 매뉴얼 (6 페이지), 매뉴얼 (5 페이지), 매뉴얼 (9 페이지)

페이지 인쇄

Default

２ s

Explanation

None

Command mode

Global configuration mode

Example

The following example shows how to set the transmission delay of LLDP to five

seconds.

Console_config# lldp reinit ５

Console_config#

1.1.5

lldp tlv-select

Description

lldp tlv-select tlv-type

no lldp tlv-select tlv-type

To add TLV which is transmitted by the LLDP message, run lldp tlv-select tlv-type. To

delete TLV which is transmitted by the LLDP message, run no lldp tlv-select tlv-type.

Parameter

tlv-type

Default

All TLVs are sent.

http://www.level1.com

TLV that can be sent or not whose values are:

macphy-confg ,management-address

port-description ,port-vlan ,system-capabilities

system-description ,system-name

LLDP Configuration Commands

Description

- 4 -