Digital Data Communications Level One GTL-2091 Manuel - Sayfa 6

Anahtar Digital Data Communications Level One GTL-2091 için çevrimiçi göz atın veya pdf Manuel indirin. Digital Data Communications Level One GTL-2091 18 sayfaları. Stp optional characteristic configuration commands
Ayrıca Digital Data Communications Level One GTL-2091 için: Manuel (14 sayfalar), Manuel (6 sayfalar), Manuel (5 sayfalar), Manuel (9 sayfalar)

Sayfayı Yazdır

Default

２ s

Explanation

None

Command mode

Global configuration mode

Example

The following example shows how to set the transmission delay of LLDP to five

seconds.

Console_config# lldp reinit ５

Console_config#

1.1.5

lldp tlv-select

Description

lldp tlv-select tlv-type

no lldp tlv-select tlv-type

To add TLV which is transmitted by the LLDP message, run lldp tlv-select tlv-type. To

delete TLV which is transmitted by the LLDP message, run no lldp tlv-select tlv-type.

Parameter

tlv-type

Default

All TLVs are sent.

http://www.level1.com

TLV that can be sent or not whose values are:

macphy-confg ,management-address

port-description ,port-vlan ,system-capabilities

system-description ,system-name

LLDP Configuration Commands

Description

- 4 -