Digital Electronics PS-3710A Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Digital Electronics PS-3710A Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics PS-3710A Series 8 페이지. Ssd unit
Digital Electronics PS-3710A Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)

페이지 인쇄

Hard Disk Unit Settings

The PS371XA-HD60P is one of the options

for PS-A, when shipped, set as the PS-A's

Slave drive (Second Drive). When using the

PS371XA-HD60P as the PS-A's Master

drive, be sure to remove the jumper plug as

follows;

PS371XA-HD60P

jumper pin

• If PS-A unit has this HDD Unit as a

built-in hard disk, the HDD unit, when

shipped, is set as the PS-A's Master. If

set as the PS-A's Slave, be sure to

use the jumper plug included in the

package, since it can cause a mal-

function or damage the unit.

• As for PS-A unit built-in Windows

Embedded (CF Card drive) and

PS371XA-HD60P use the CF Card

drive and the HDD unit as the factory

settings (CF Card drive is set to the

PS-A's Master drive and HDD unit is

set to the PS-A's Slave drive).

Slave

Master

(Factory

Settings)

jumper plug

SSD Unit Settings

The PS371XA-SD16P is one of the options

for PS-A, when shipped, set as the PS-A's

Master drive (First Drive). When using the

PS371XA-SD16P as the PS-A's Slave drive,

be sure to remove the jumper plug as follows;

PS371XA-SD16P

jumper pin

• If PS-A unit has this SSD Unit as a

built-in SSD disk, the SSD unit, when

shipped, is set as the PS-A's Master. If

set as the PS-A's Slave, be sure to

remove the jumper plug, since it can

cause a malfunction or damage the

unit.