Digital Electronics PS-3710A Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} Digital Electronics PS-3710A Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics PS-3710A Series 8 페이지. Ssd unit
Digital Electronics PS-3710A Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)

페이지 인쇄

When attaching the HDD/SSD

to the PS-3711A

(1) Place the PS-A unit face down and

unscrew eight (8) attachment screws.

(See diagram).

(2) Lift the PS-A unit's Rear Cover off of the

PS-A unit.

As for AC type, remove the power cover

as shown below.

PS-A unit's Rear Cover

(3) Insert the HDD/SSD unit cable

connector completely into the IDE I/F.

Attach the HDD/SSD unit using four (4)

attachment screws.

The torque should be 0.5 to 0.6 N·m.

(4) Replace the PS-A unit's Rear Cover and

reattach eight (8) attachment screws.

As for AC type, replace the power cover

and reattach the screws.

The torque should be 0.5 to 0.6 N·m.

IDE I/F