Digital Electronics PS3651A-T42S-24V 설치 매뉴얼 - 페이지 12
{카테고리_이름} Digital Electronics PS3651A-T42S-24V에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics PS3651A-T42S-24V 17 페이지.
페이지 인쇄(3) Insert each fastener's hook into the slot
and tighten it with a screwdriver. Insert
the installation fasteners securely into
the insertion slot recess. There are eight
insertion slots.
Insertion Slot Recess
Hook the fastener
on the Recess,
Panel
Installation Fastener
PS-A
Hook
• Tightening the screws with too much
force can damage the PS-A unit.
• The necessary torque is 0.5N•m.
• Be sure to insert installation fasteners
in the recessed portion of an
installation fasteners hole. If the
fasteners are not correctly attached,
the PS-A unit may shift or fall out of the
panel.
Wiring
• To avoid an electric shock, prior to
connecting the PS-A unit's power cord
terminals to the power terminal block,
confirm that the PS-A unit's power
supply is completely turned OFF, via a
breaker, or similar unit.
Insertion
Slots
and secure the fastener
on the panel with a screw.
• Supplying a power voltage other than
that specified can damage the PS-A
and the power supply.
• Since the DC power supply Type has
no power ON/OFF switch, be sure to
attach a breaker-type switch to its
power cord.
• When the FG terminal is connected, be
sure the wire is grounded.
• When the FG terminal is connected, be
sure the wire is grounded. Not
grounding the PS-A unit will result in
excessive noise. Use your country's
applicable standard for grounding.
Power Cord Specifications
Use copper conductors only.
Power Cord
Diameter
Conductor
Type
Conductor
Length
*1
If the Conductor's end (individual) wires are
not twisted correctly, the end wires may either
short against each other, or against an electrode.
Wiring
When connecting the power cord, use the
following items when performing wiring.
(Items are made by Phoenix Contact.)
Recommended
Driver
Recommended
Pin Terminals
12
2
0.75 to 2.5mm
(18 to 12 AWG)
Solid or Stranded Wire
10mm [0.39in.]
SZS 0.6x3.5 (1205053)
AI 0.75-10GY (3201288)
AI 1-10RD (3200182)
AI 1.5-10BK (3200195)
AI 2.5-12BU (3200962)
*1