Digital Electronics Corporation PS-3651A series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Digital Electronics Corporation PS-3651A series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS-3651A series 4 페이지. Ps365xa-hd250

페이지 인쇄

(7) With opposite procedure above, set the

DISK cover, expansion board base, and

expansion board cover to the PS-A unit,

respectively. The torque required to

tighten these screws is 0.5 to 0.6 N·m.

When attaching the HDD unit

to the PS-3651A

(1) Turn OFF the power switch of the PS-A

and remove the power cable. Place the

PS-A on a flat, level surface facing the

display face downwards.

(2) Unscrew the DISK cover's screws (3)

and remove the expansion board base.

(3) Mount the HDD unit vertically on the

circuit board and plug the HDD unit

cable connector in the Serial ATA

interface.

• Mount the HDD unit vertically and

thoroughly not to hit the circuit board.

Otherwise, it may cause a malfunction

or damage the HDD unit and PS-A.

Serial ATA Interface

(4) Fix the HDD unit with the screws (4)

which are contained in your package.

The torque required to tighten these

screws is 0.5 to 0.6 N·m.

(5) With opposite procedure above, set the

DISK cover to the PS-A unit. The

torque required to tighten these screws is

0.5 to 0.6 N·m.

Do you have any questions about

difficulties with this product?

Please access our site anytime that

you need help with a solution.

http://www.pro-face.com/otasuke/

Note

Please be aware that Digital Electronics Corpora-

tion shall not be held liable by the user for any

damages, losses, or third party claims arising

from the uses of this product.

Digital Electronics Corporation

8-2-52 Nanko-higashi

Suminoe-ku, Osaka 559-0031

JAPAN

TEL: +81-(0)6-6613-3116

FAX: +81-(0)6-6613-5888

http://www.pro-face.com/

Inquiry