Digital Electronics Corporation PS345XA-HD40 설치 매뉴얼 - 페이지 7

{카테고리_이름} Digital Electronics Corporation PS345XA-HD40에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS345XA-HD40 8 페이지.

When attaching the HDD to the PS3000-BA

(1) Unscrew the screws (2) from the Expan-

sion Board Cover, and remove the cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(2) Unscrew the screws (2) of the HDD

cover and remove the HDD cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(3) Unscrew the screws (4) of the HDD unit,

remove the cable connector from IDE I/F

while lifting up the HDD unit, and

remove it.

To replace the HDD unit, connect the

cable connector to IDE I/F securely and

fix the HDD unit with the screws (4). The

torque required for these screws is 0.5 to

0.6 N•m.

Inside of the PS3000-BA' s top

IDE I/F