Digital Electronics Corporation PS345XA-HD40 Kurulum Kılavuzu - Sayfa 7

Depolama Digital Electronics Corporation PS345XA-HD40 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Digital Electronics Corporation PS345XA-HD40 8 sayfaları.

Sayfayı Yazdır

When attaching the HDD to the PS3000-BA

(1) Unscrew the screws (2) from the Expan-

sion Board Cover, and remove the cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(2) Unscrew the screws (2) of the HDD

cover and remove the HDD cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(3) Unscrew the screws (4) of the HDD unit,

remove the cable connector from IDE I/F

while lifting up the HDD unit, and

remove it.

To replace the HDD unit, connect the

cable connector to IDE I/F securely and

fix the HDD unit with the screws (4). The

torque required for these screws is 0.5 to

0.6 N•m.

Inside of the PS3000-BA' s top

IDE I/F