Digital Electronics Corporation PS-2000B Series 설치 매뉴얼 - 페이지 10

{카테고리_이름} Digital Electronics Corporation PS-2000B Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS-2000B Series 16 페이지. Windows 2000 multi language preinstalled hard disk unit
Digital Electronics Corporation PS-2000B Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지)

페이지 인쇄

HDD unit

2) Tilt the maintenance cover up

IDE I/F 1

3) Insert the HDD unit's cable

Front of

PS-B unit

4) Attach the HDD unit using the

5) Replace the PS-B unit's cover

Cable

-10-

as shown by arrow a and lift

it out in the direction shown by

arrow b (see diagram).

(Go to step 3.)

connector completely into IDE

I/F 1.

four (4) attachment screws. (See

diagram) The torque should be

0.5 to 0.6 N•m.

and reattach all four (4)

attachment screws. The torque

should be 0.6 to 0.8 N•m. If you

used the maintenance cover,

replace that cover and fasten the

its two (2) attachment screws.

The torque should be 0.5 to 0.6

N•m.