Digital Electronics Corporation PS-2000B Series 설치 매뉴얼 - 페이지 9

{카테고리_이름} Digital Electronics Corporation PS-2000B Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Electronics Corporation PS-2000B Series 16 페이지. Windows 2000 multi language preinstalled hard disk unit
Digital Electronics Corporation PS-2000B Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지)

페이지 인쇄

Installation

Use the following steps to install the HDD unit in the PS-B.

Shock Danger! Be sure to unplug the PS-B unit from its

power supply prior to installing the HDD unit.

Since the HDD unit is a precision instrument that has a low resis-

tance to shocks, be sure it is neither hit by nor pressed strongly

against another object when installing it.

Cover

You can also remove only the maintenance cover and install the HDD unit.

To do this, please perform the following steps.

WARNINGS

WARNING

Step 2

Step 1

1) Lay the PS-B unit on its side

and unscrew the four (4) cover

attachment screws.

2) Slide the cover horizontally in

the direction shown by the arrow

(see diagram) and lift it out from

the PS-B unit.

(Go to step 3.)

1) Loosen the two (2)

maintenance cover

attachment screws.

-9-