Digital Electronics Corporation PS-2000B Series Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Pulpit Digital Electronics Corporation PS-2000B Series. Digital Electronics Corporation PS-2000B Series 16 stron. Windows 2000 multi language preinstalled hard disk unit
Również dla Digital Electronics Corporation PS-2000B Series: Instrukcja instalacji (17 strony)

Drukuj stronę

Installation

Use the following steps to install the HDD unit in the PS-B.

Shock Danger! Be sure to unplug the PS-B unit from its

power supply prior to installing the HDD unit.

Since the HDD unit is a precision instrument that has a low resis-

tance to shocks, be sure it is neither hit by nor pressed strongly

against another object when installing it.

Cover

You can also remove only the maintenance cover and install the HDD unit.

To do this, please perform the following steps.

WARNINGS

WARNING

Step 2

Step 1

1) Lay the PS-B unit on its side

and unscrew the four (4) cover

attachment screws.

2) Slide the cover horizontally in

the direction shown by the arrow

(see diagram) and lift it out from

the PS-B unit.

(Go to step 3.)

1) Loosen the two (2)

maintenance cover

attachment screws.

-9-