Siemens SIMATIC ET 200SP HA 매뉴얼 - 페이지 8

{카테고리_이름} Siemens SIMATIC ET 200SP HA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC ET 200SP HA 38 페이지. Distributed i/o devices busadapter for distributed i/o
Siemens SIMATIC ET 200SP HA에 대해서도 마찬가지입니다: 매뉴얼 (32 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 장비 매뉴얼 (44 페이지), 장비 매뉴얼 (50 페이지), 장비 매뉴얼 (38 페이지), 장비 매뉴얼 (46 페이지), 장비 매뉴얼 (42 페이지), 장비 매뉴얼 (44 페이지), 장비 매뉴얼 (36 페이지), 장비 매뉴얼 (38 페이지)

페이지 인쇄
Siemens SIMATIC ET 200SP HA 매뉴얼
Product overview
2.1 Properties of the I/O module DI 8x24...125VDC HA
Properties
The I/O module has the following technical properties:
● 8 digital inputs electrically isolated from the backplane bus and supply voltage L+/M groups
of 8
● Digital input with the following parameterizable properties
– Diagnostics
– Input delay
– Hardware interrupts for positive and negative edges
● Nominal input voltage range 24 to 125 V DC
● Module-specific configurable diagnostics for missing supply voltage L+
● Suitable for connecting switches and 2-/ 3-/4-wire sensors in accordance with IEC 61131,
type 1 and 3
The I/O module supports the following functions:
● Firmware update
● I&M identification data
● Parameter reassignment in RUN
● Value status
● Time stamping (accuracy 1 ms)
You can configure the I/O module with HW Config and integrate it into your system.
Danger of electric current!
This may result in death or severe injury.
Electrical hazard arises with electric circuits operated with voltages >30 V
60 VDC.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color-coded labels
● Reference identification label
● Shield connector
8
WARNING
Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)
and 42.4 V
eff
peak
Manual, 11/2017, A5E39288633-AB
or