Siemens SIMATIC ET 200SP HA Manuel - Sayfa 8

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP HA için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC ET 200SP HA 38 sayfaları. Distributed i/o devices busadapter for distributed i/o
Ayrıca Siemens SIMATIC ET 200SP HA için: Manuel (32 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Ekipman Kılavuzu (44 sayfalar), Ekipman Kılavuzu (50 sayfalar), Ekipman Kılavuzu (38 sayfalar), Ekipman Kılavuzu (46 sayfalar), Ekipman Kılavuzu (42 sayfalar), Ekipman Kılavuzu (44 sayfalar), Ekipman Kılavuzu (36 sayfalar), Ekipman Kılavuzu (38 sayfalar)

Product overview

2.1 Properties of the I/O module DI 8x24...125VDC HA

Properties

The I/O module has the following technical properties:

● 8 digital inputs electrically isolated from the backplane bus and supply voltage L+/M groups

of 8

● Digital input with the following parameterizable properties

– Diagnostics

– Input delay

– Hardware interrupts for positive and negative edges

● Nominal input voltage range 24 to 125 V DC

● Module-specific configurable diagnostics for missing supply voltage L+

● Suitable for connecting switches and 2-/ 3-/4-wire sensors in accordance with IEC 61131,

type 1 and 3

The I/O module supports the following functions:

● Firmware update

● I&M identification data

● Parameter reassignment in RUN

● Value status

● Time stamping (accuracy 1 ms)

You can configure the I/O module with HW Config and integrate it into your system.

Danger of electric current!

This may result in death or severe injury.

Electrical hazard arises with electric circuits operated with voltages >30 V

60 VDC.

Accessories

The following accessories must be ordered separately:

● Labeling strips

● Color-coded labels

● Reference identification label

● Shield connector

WARNING

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

and 42.4 V

eff

peak

Manual, 11/2017, A5E39288633-AB