Siemens SIMATIC NET SINAUT MD720-3 시스템 매뉴얼 - 페이지 13

{카테고리_이름} Siemens SIMATIC NET SINAUT MD720-3에 대한 시스템 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC NET SINAUT MD720-3 20 페이지.

Inserting the SIM card

Notice

•

The device must be switched off when you insert or change the SIM card.

•

A plug-in SIM card (3 V) is used.

Changing the SIM card

If you change the SIM card, please do not forget to update also the PIN number in

your application.

If you use a lot of SIM cards it can be helpful to set all PINs to the same PIN

number. You can do this i.e. by using a mobile phone. Please observe the security

requirements of your organization.

To insert the SIM card proceed as follows:

1. Make sure that the device is disconnected from the supply voltage.

2. The SINAUT MD720-3 must be opened to insert the SIM card.

The housing is fastened by two clamps, one on top of the housing and one on the

bottom side (see figure 2-1).

figure 2-1

SINAUT MD720-3

C79000-G8976-C211

Clamp