Siemens SIMATIC RTLS Series 사용 설명서 - 페이지 16

{카테고리_이름} Siemens SIMATIC RTLS Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC RTLS Series 26 페이지. Localization systems
Siemens SIMATIC RTLS Series에 대해서도 마찬가지입니다: 매뉴얼 (19 페이지), 장치 설명서 (19 페이지), 장치 설명서 (15 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

Installation & Operation

3.1 Notes on installation

Supply voltage

When the supply voltage is connected to the power plug, all LEDs flash briefly for a moment.

The POWER LED lights up as soon as voltage is present.

You can supply the device with power via the Ethernet cable. In this case, the power plug

must be tightly sealed to prevent moisture from penetrating. The device is a class 0 device

according to PoE.

NOTICE

No simultaneous supply voltage

Do not supply the device with power through the mains and the PoE connection at the

same time.

Check whether the rated voltage of the power supply corresponds to the values in the

section "Technical specifications (Page 21)".

Safety extra low voltage

The equipment is designed for operation with Safety Extra-Low Voltage (SELV) by a

Limited Power Source (LPS). (This does not apply to 100 V...240 V devices.)

This means that only SELV / LPS complying with IEC 60950-1 / EN 60950-1 / VDE 0805-1

must be connected to the power supply terminals, or the power supply unit for the

equipment power supply must comply with NEC Class 2, as described by the National

Electrical Code (r) (ANSI / NFPA 70).

CAUTION

Operating Instructions, 06/2020, C79000-G8976-C515-03

SIMATIC RTLS4030G