Siemens Simatic S7-300 시작하기 - 페이지 12

{카테고리_이름} Siemens Simatic S7-300에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 32 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지)

Learning units

3.2 Optionally: Setting up the T station with the help of the wizard

3.2

Optionally: Setting up the T station with the help of the wizard

The station wizard helps you to carry out several steps when configuring a CPU 31xT in one

work cycle. You have the following options:

● Using the station wizards

● Not using the station wizards

"2nd step".

Procedure

Step

Activity

Set up a new project in the SIMATIC Manager (e.g. "Getting Started CPU 317T").

Select the Insert > Station > SIMATIC T Station menu command.

The "Set up T station" dialog box opens.

Select the following settings in the fields:

"CPU type": CPU317T-2 DP

"Generate Technology System Data" option activated

"MPI/DP": New, type MPI, transmission rate 1.5 Mbps

"PG/PC": Not used

Carry out the settings in all other fields.

If required, press the button "Help" to obtain additional information.

Carry out the following described steps and then continue with learning unit "6th step".

Do not carry out the following described steps, instead, continue with the learning unit

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05