Siemens Simatic S7-300 Pierwsze kroki - Strona 12

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Urządzenia przemysłowe Siemens Simatic S7-300. Siemens Simatic S7-300 32 stron. Automation systems, controlling a physical axis
Również dla Siemens Simatic S7-300: Podręcznik użytkownika (34 strony), Podręcznik (21 strony), Instrukcja obsługi (4 strony), Instrukcja obsługi (5 strony), Podręcznik (35 strony), Pierwsze kroki (8 strony), Pierwsze kroki (16 strony), Opis aplikacji (24 strony), Podręcznik (18 strony), Podręcznik (32 strony), Instrukcja instalacji i sprzętu (20 strony)

Drukuj stronę
Siemens Simatic S7-300 Pierwsze kroki
Learning units

3.2 Optionally: Setting up the T station with the help of the wizard

3.2
Optionally: Setting up the T station with the help of the wizard
The station wizard helps you to carry out several steps when configuring a CPU 31xT in one
work cycle. You have the following options:
● Using the station wizards
● Not using the station wizards
"2nd step".
Procedure
Step
Activity
1
Set up a new project in the SIMATIC Manager (e.g. "Getting Started CPU 317T").
2
Select the Insert > Station > SIMATIC T Station menu command.
The "Set up T station" dialog box opens.
Select the following settings in the fields:
"CPU type": CPU317T-2 DP
"Generate Technology System Data" option activated
"MPI/DP": New, type MPI, transmission rate 1.5 Mbps
"PG/PC": Not used
Carry out the settings in all other fields.
If required, press the button "Help" to obtain additional information.
12
Carry out the following described steps and then continue with learning unit "6th step".
Do not carry out the following described steps, instead, continue with the learning unit
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05