Siemens Simatic S7-400 매뉴얼 - 페이지 18

{카테고리_이름} Siemens Simatic S7-400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-400 35 페이지. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 시작하기 (36 페이지)

페이지 인쇄
Siemens Simatic S7-400 매뉴얼
Micro Automation Set 14
5.3

Configuring components

Configuring configuration PC
Table 5-2
No.
1.
To ensure the functionality of Micro
Automation Set 14, the following software
must be installed depending on the
configuration.
•
STEP 7-Micro/WIN
•
STEP 7 V5.3
2.
The following network settings have to be
applied on the used network card of the
PC:
•
IP address:
•
Subnet mask: 255.255.255.0
Configuring S7-200 "Basis" with MicroWin project
Table 5-3
No.
1.
Connect the S7-200 CPU to a DC 24V
power supply.
2.
Connect the configuration PC and S7-200
"Basis" with a USB/PPI cable via the
USB interface of the PC.
3.
Plug the ribbon cable of CP 243-1 in the
interface at the S7-200 CPU.
4.
Plug the clock cartridge in the S7-200
CPU.
V2.0
Entry ID 21062588
Function
192.168.2.141
Function
05/18/05
Comment
Comment
Configuration PC
PPI cable
S7-200 CPU 222
Clock
Live Demo
S7-200
"
Basis"
18/35