Siemens Simatic S7-400 Manual - Page 18

Browse online or download pdf Manual for Industrial Equipment Siemens Simatic S7-400. Siemens Simatic S7-400 35 pages. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Also for Siemens Simatic S7-400: Manual (18 pages), Getting Started (36 pages)

Print Page
Siemens Simatic S7-400 Manual
Micro Automation Set 14
5.3

Configuring components

Configuring configuration PC
Table 5-2
No.
1.
To ensure the functionality of Micro
Automation Set 14, the following software
must be installed depending on the
configuration.
•
STEP 7-Micro/WIN
•
STEP 7 V5.3
2.
The following network settings have to be
applied on the used network card of the
PC:
•
IP address:
•
Subnet mask: 255.255.255.0
Configuring S7-200 "Basis" with MicroWin project
Table 5-3
No.
1.
Connect the S7-200 CPU to a DC 24V
power supply.
2.
Connect the configuration PC and S7-200
"Basis" with a USB/PPI cable via the
USB interface of the PC.
3.
Plug the ribbon cable of CP 243-1 in the
interface at the S7-200 CPU.
4.
Plug the clock cartridge in the S7-200
CPU.
V2.0
Entry ID 21062588
Function
192.168.2.141
Function
05/18/05
Comment
Comment
Configuration PC
PPI cable
S7-200 CPU 222
Clock
Live Demo
S7-200
"
Basis"
18/35