Siemens SIMATIC TP700 Comfort Outdoor 사용 설명서 - 페이지 13

{카테고리_이름} Siemens SIMATIC TP700 Comfort Outdoor에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP700 Comfort Outdoor 29 페이지. Touch-sreen operator control panel
Siemens SIMATIC TP700 Comfort Outdoor에 대해서도 마찬가지입니다: 간결한 사용 설명서 (38 페이지), 간결한 사용 설명서 (42 페이지)

페이지 인쇄

Siemens SIMATIC TP700 Comfort Outdoor 사용 설명서

4.1.5 Cutter panel

The first row of buttons control the machines cutting mode.

From Left to Right:

Auto Mode, Camera Mode, Sensor Mode, Timer Mode and Stop & Cut.

LENGTH MODE:

The cutting length is controlled via an electronic cam; this will perform seamless

cutting length adjustments from 0 to 2500 cuts per minute.

Cut Length (Blue Display):

Length in millimeters/inches of the pieces to be cut.

Length Scaler (Blue Display):

Scaling factor to adjust entered cut length on HMI and actual length.

The length factor is used to match the length set on the screen with the actual

length of the cut pieces. Theoretically this value should be 100%. However, different

variables such us material properties, belts, cut ratio, etc. can affect the final result.

Therefore, this value can be modified to correct this difference.

It should NOT be used to adjust cut length. This is done on the main Home

Screen.

For more technical support, please go to our website: