Siemens SIMATIC TP700 Comfort Outdoor Gebruiksaanwijzing - Pagina 13
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SIMATIC TP700 Comfort Outdoor. Siemens SIMATIC TP700 Comfort Outdoor 29 pagina's. Touch-sreen operator control panel
Ook voor Siemens SIMATIC TP700 Comfort Outdoor: Compacte gebruiksaanwijzing (38 pagina's), Compacte gebruiksaanwijzing (42 pagina's)
Pagina afdrukken
4.1.5 Cutter panel
The first row of buttons control the machines cutting mode.
From Left to Right:
Auto Mode, Camera Mode, Sensor Mode, Timer Mode and Stop & Cut.
LENGTH MODE:
The cutting length is controlled via an electronic cam; this will perform seamless
cutting length adjustments from 0 to 2500 cuts per minute.
Cut Length (Blue Display):
Length in millimeters/inches of the pieces to be cut.
Length Scaler (Blue Display):
Scaling factor to adjust entered cut length on HMI and actual length.
The length factor is used to match the length set on the screen with the actual
length of the cut pieces. Theoretically this value should be 100%. However, different
variables such us material properties, belts, cut ratio, etc. can affect the final result.
Therefore, this value can be modified to correct this difference.
It should NOT be used to adjust cut length. This is done on the main Home
Screen.
For more technical support, please go to our website:
www.gillardcutting.com/technical
12