Siemens SIREMOBIL Iso-C SP 설치 및 설정 지침 매뉴얼 - 페이지 3

{카테고리_이름} Siemens SIREMOBIL Iso-C SP에 대한 설치 및 설정 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIREMOBIL Iso-C SP 16 페이지.

Area dose product measurement device

Safety information

General safety information

WARNING

Safety Information, Electrical

WARNING

CAUTION

Siemens AG

Medical Engineering

Danger of injuries, death or material damage.

Note

- the product-specific safety notes in these instructions,

- the general safety information in the document

TD00-000.860.01...

and

- the safety information in accordance with ARTD Part 2.

Non-compliance can lead to death, to injuries or to material

damage.

Electrical safety!

Non-compliance can lead to severe injuries and even death and to

material damage.

After opening the cover panels, the parts under voltage are acces-

sible. To avoid risks, switch off power to the system prior to open-

ing cover panels. Pull out the power supply plug.

If an uninterruptible power supply (UPS) is installed in the sys-

tem, the power supply of the UPS must be switched free of volt-

age in addition or the voltage output plug must be pulled out.

If work has to be performed under electrical voltage, the general

safety information according to TD00-000.860.01... must be com-

plied with.

Electrical voltage!

Non-compliance can lead to material damage.

When working on the system, ESD regulations must be observed.

SPR2-230.033.04

Rev. 03

Page 3 of 16

06.05

CS PS 24

SIREMOBIL Iso-C