Siemens SIREMOBIL Iso-C SP Інструкція з монтажу та налаштування - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу та налаштування для Промислове обладнання Siemens SIREMOBIL Iso-C SP. Siemens SIREMOBIL Iso-C SP 16 сторінок.
Друкувати сторінку
Area dose product measurement device
Safety information
General safety information
WARNING
Safety Information, Electrical
WARNING
CAUTION
Siemens AG
Medical Engineering
Danger of injuries, death or material damage.
Note
- the product-specific safety notes in these instructions,
- the general safety information in the document
TD00-000.860.01...
and
- the safety information in accordance with ARTD Part 2.
Non-compliance can lead to death, to injuries or to material
damage.
Electrical safety!
Non-compliance can lead to severe injuries and even death and to
material damage.
After opening the cover panels, the parts under voltage are acces-
sible. To avoid risks, switch off power to the system prior to open-
ing cover panels. Pull out the power supply plug.
If an uninterruptible power supply (UPS) is installed in the sys-
tem, the power supply of the UPS must be switched free of volt-
age in addition or the voltage output plug must be pulled out.
If work has to be performed under electrical voltage, the general
safety information according to TD00-000.860.01... must be com-
plied with.
Electrical voltage!
Non-compliance can lead to material damage.
When working on the system, ESD regulations must be observed.
SPR2-230.033.04
Rev. 03
Page 3 of 16
06.05
CS PS 24
3
1
1
1
SIREMOBIL Iso-C