Digital Extender DS-41R 사용자 설명서 - 페이지 6

{카테고리_이름} Digital Extender DS-41R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Extender DS-41R 12 페이지. Dvi switcher

3 Video Connection

VIDEO CONNECTION

1. Connect your video source's DVI output port to the DVI switch's DVI input port using standard

DVI cables(not included). Make sure all your DVI sources and the display is turned off before

connecting the cables)

2. Connect your DVI display's DVI input port to DVI switch's DVI output port. Make sure your DVI

display is turned off before connecting the cables)

3. Plug the 5V power supply into the switch's power input port.

4. Plug the 5V wall mount power supply into the wall outlet.

5. Turn on your display.

6. Turn on your video sources.

7. Use your remote control unit to switch channels. Or use the select button on the front panel of

the switch to change channels.

RS232 connection allows the user to interface the DVI LINK switch with a serial port on a computer

or other control device. The computer or other control device may require additional software for

various control functions.

RS232 Control Information

Our DS-21R and DS-41R use pin#2 and #3 and the assignments are as follows;

Control computer's RS232 pin# 2 is connected to our DVI switch's pin#3

Control computer's RS232 pin# 3 is connected to our DVI switch's pin#2

Baud rate: 9600, Data bits: 8, Stop Bits: 1, Parity: None, Flow control: None

The control protocols are as follows;

Channel 1 request is ascii code "@001*" and the response back to the computer is "!"

Channel 2 request is ascii code "@002*" and the response back to the computer is "!"

Channel 3 request is ascii code "@003*" and the response back to the computer is "!"

Channel 4 request is ascii code "@004*" and the response back to the computer is "!"