Siemens sitrans 사용 설명서 - 페이지 10

{카테고리_이름} Siemens sitrans에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens sitrans 20 페이지. Variable frequency drives and instrumentation using variable frequency drives and instrumentation without interference
Siemens sitrans에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

페이지 인쇄
Siemens sitrans 사용 설명서

Installation

Ideal Locations

•
areas where the acoustic emission levels are highest and most consistent
•
where the material impact is greatest
•
areas closest to the point of leakage (e.g. valve body)
•
closest point to source of cavitation (e.g. pump body)

Conditions to Avoid

•
non-metallic surfaces, as these tend to attenuate acoustic emission levels
•
pipes with non-metallic liners as these tend to attenuate acoustic emission levels

Conditions to Consider

•
joints and interfaces attenuate the acoustic emission levels.
•
minimal temperature variation where acoustic emission levels are weak.
•
location should provide sufficient response time in alarm or control circuit. e.g. loss
of bearing lubrication, plug chute detection.
Solids Flow Sensing
Recommended
Good friction between product and
piping. Mount Sensor on the
upstream side of gasket for highest
level of acoustic emission activity.
Page 6
SITRANS AS 100 – INSTRUCTION MANUAL
Not Recommended
Minimal amount of acoustic emission
activity due to limited friction
between product and piping.
7ML19985DM02