Siemens SITRANS WFS300 사용 설명서 - 페이지 28
{카테고리_이름} Siemens SITRANS WFS300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS WFS300 42 페이지. Sensing heads
페이지 인쇄
Service and maintenance
7.1
Maintenance
Establish a program of routine maintenance to ensure the highest achievable level of
performance. Follow good housekeeping practices in the area of the flowmeter.
Typical maintenance program
Clean area around flowmeter
Check sensing plate surface
Check damping fluid
Check sensing head inner gasket
Check sensing plate wear
Check test weight Rate display
Test flowmeter linearity
Remove any material buildup in the impact area of the sensing plate.
1
7.2
Spare parts
Siemens recommends the following spare parts be kept on hand:
• sensing inner gasket
• sensing head outer gasket (base mount version only)
• damping fluid
• sensing plate
Contact Siemens or your distributor for spare parts ordering information. For a list of parts
and part identification diagram, please see Appendix A (Page 38).
Unit repair and excluded liability
All changes and repairs must be done by qualified personnel and applicable safety regulations
must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device.
• All new components must be provided by Siemens.
• Restrict repair to faulty components only.
• Do not re-use faulty components.
28
Maintenance description
1
Frequency
Regular
Monthly
✓
✓
✓
✓
✓
✓
✓
Operating Instructions, 03/2021, A5E32880243-AC
7
Semi-annual
Annual
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
SITRANS WFS300