Siemens SITRANS WW300 사용 설명서 - 페이지 15

{카테고리_이름} Siemens SITRANS WW300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS WW300 42 페이지. Weighfeeders
Siemens SITRANS WW300에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)

페이지 인쇄

8. Remove only the tagged shipping bolt that is attached to the load cell. This bolt supports the

weighbridge during transport and installation.

Note

DO NOT loosen or tighten the overload bolt—it has been factory set to minimize the

possibility of load cell damage resulting from incidental overload.

9. Remove the locking pin on the belt plow and scraper to allow them to contact the belt

properly. On units with an optional gravity tensioner and tracker the locking pin will also need

to be removed.

Note

Store these pins as they can be used to support the parts during a belt change.

10. Before starting the weighfeeder, make a final check to see that the conveyor belt is free of all

tools and foreign objects, and that the infeed/skirtboards are not pinching against the belt.

SITRANS WW300

Operating Instructions, 05/2015, A5E33560691-AB

Installing

4.1 Installation steps