Siemens SITRANS WW300 사용 설명서 - 페이지 13

{카테고리_이름} Siemens SITRANS WW300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS WW300 42 페이지. Weighfeeders
Siemens SITRANS WW300에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)

페이지 인쇄

Installing

Note

When lifting the weighfeeder, connect to the lifting points at the top of the unit, and follow

local governing code for lifting/hoisting.

Perform a thorough and systematic inspection of containers immediately upon receipt of your

Siemens weighfeeder. The containers are packed to separate each item and provide protection

during shipping.

Note

Do not remove equipment from shipping crates or boxes until you check for possible

shipping damage. Contact the carrier immediately if damage is noted.

Your weighfeeder has been designed, assembled, and factory tested for your specific

application.

Note

• The frame of the weighfeeder needs to be grounded to ensure accurate signal processing

to the integrator.

• Do NOT remove the tagged load cell shipping bolt(s) until the installation is complete to

prevent load cell damage.

• Do NOT weld on or near the weighfeeder while the load cell is connected to the electronic

integrator. Damage to the integrator may result if the load cell is not disconnected from

the integrator.

• Follow a scheduled, preventative maintenance program to ensure optimum performance

and long equipment life.

SITRANS WW300

Operating Instructions, 05/2015, A5E33560691-AB