Siemens SITRANS WW310 사용 설명서 - 페이지 32

{카테고리_이름} Siemens SITRANS WW310에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS WW310 48 페이지. Weighfeeders

Start Up

8.7 Load cell replacement

8.7.2

Installing new load cell

Step 1

Slide the new load cell into position.

Step 2

Install the two bottom load cell mount bolts and tighten them by hand.

The load cell should now be resting against the overload stop.

Step 3

Install the two top/front load cell mount bolts. Tighten them by hand.

Step 4

Start with the bottom load cell mounting bolts, and tighten them to the torque rating specified

with the new load cell. Now tighten the two top/front load cell mounting bolts to the same torque

value.

Step 5

Route the load cell cable to the junction box, and connect the load cell according to the supplied

interwiring diagram.

Repeat for other load cells if necessary

Step 6

Perform a load cell balancing procedure as described in the integrator instruction manual.

Operating Instructions, 03/2014, A5E33490433-AA

SITRANS WW310